Installation & maintenance
How to assemble your led sign
This video illustrates the steps to assemble / set up your LED sign after removing the sections from the crate. Assembly Instructions Step 1 Align the LED Sign Sections After unpacking your X Series LED Sign, arrange your sign cabinets in ...
How to configure the TP LINK CPE210 and CPE510 for use the XMPlayer3
How to set up your TP Link CPE 210 / 510 Wireless POE antenna for use with your LED Sign?
How to replace the X Series Front Access LED module
The X Series LED module is a revolutionary LED module that can be replaced in under a minute. Step 1: Identify the two lock points on the module. Step 2: Insert a 3mm Hex key and twist counterclockwise. Step3: Carefully remove the module from the ...
Which resolution is the best for large billboard sized signs.
Question: I need a really big EMC, approximately 10’-6” x 36’ single sided. When they get that large, do you recommend a particular MM? 6, 8 or 10? Answer: Resolution becomes less critical when the size of the sign increases; the brightness will be ...